简体中文
English
News 
How to check the wear of SMT Squeegee?
Release Time : 2021-03-23 View Count : 次
What is the difference between DST squeegee and ordinary squeegee used in printing machines?
DST squeegee is pneumatic tire pressurization and unloading, while ordinary squeegee is cylinder pressurization and unloading. The squeegee is just different from the pressure device. The DST squeegee has a relatively constant pressure, which can better remove the adhesive on the drying cylinder or each roller.
How to check the wear of SMT Squeegee?
If you have experience, you can feel the squeegee with your hand, or use a flashlight to see through the light and press the squeegee on the steel mesh. These are all temporary solutions to the problem. It is still necessary to use a tension gauge to check the pressure of the scraper on the steel mesh, in order to determine the degree of wear.
Why is the squeegee on the squeegee film machine made of copper?
We used to use copper squeegee, but they caused significant damage to the drum. Later, we switched to using a type of steel called Sai Steel Plate (similar to PTFE, but harder). After using it for 10-, the effect was good and the price was also cheap. It is available online, so you can consider trying it out.
How to check the gap between the marking machine rubber roller and the squeegee?
If there is looseness or clearance between the shaft and the bearing or bearing groove, it indicates that the bearing is damaged (the noise is emitted by it).
What is the difference between the mechanical accuracy of scraper scraping and angle grinder scraping?
The squeegee scrapes more accurately, and can only scrape one or a few points. The angle grinder grinds one piece at a time and cannot be precisely controlled.
As a high-quality supplier of squeegee, Jayong has rich experience in customizing manual squeegee inspection machines for many enterprises. The ST2 squegee inspection machine is a fully automatic squeegee quality inspection instrument that comprehensively inspects the quality of squeegee and records the inspection data and results. ST2 is a good helper for quality control of squeegee.
